Ventilation industry CNC Duct Auto Production Line 5 V
Feature of Duct manufacture auto-line V:
It can make TDF flange / angle steel flange. The capacity of day is
1000-2500 square meters. Users can only input sizes of duct you
need, then this auto line will automatically complete unwinding,
leveling, punching, shearing, Pittsburgh lock forming, TDF/Angle
steel flange forming and C-cleat flange and folding into
rectangular ducts.
Features:
● Liner structure；streamline in production and small occupation;
● All coilers being driven by the speed adjustable independent
frequency converter motor ;
● with the material processing saving mode, users can reduce the
waste
of sheet metal significantly to less than 20mm per material coiler
● with the feature of servo motor driven in folding process and
accurate positioning, it has the obvious advantage, especially when
make “口”
shaped duct .
● only need one worker to operate the machine , its production
capacity can reach 2000 M3 each 8 hours
● the speed of each part can be adjusted as users’request.
● Support production data records export and print function
(optional)
Main imported configuration:
● Beijing Huade with hydraulic system
● Japan Omron encoder
● Japan MITSUBSHI controller FX3GA-40MR-CM
● Taiwan Hiwin linear guide
● Schneider electrical system
BASIC EQUIPMENTS:
● Two electric feeding coil candles (2900*1900*950 mm)
● A material supporting frame
● A main machine auto line II, including leveling, beading,
punching and cutting.
● A movable high-speed Pittsburgh lock forming machine
● A duplex angle steel flange forming machine
● A duplex TDF flange forming machine
● Three servo motors power material feeder
● Three Servo Drivers
● A hydraulic folding machine
● A CNC System PLC controller
Technical details:
| Model No. | PSL5-1.2x1300 |
| Max Coil Width | 1300mm |
| Thickness Range | 0.4-1.2mm |
| Speed | 0-18m/min |
| Power | 24.5 kw |
| dimensions | 18.5*2.8*1.5m |
| Shearing Tolerance | ±0.5mm |
| Diagonal Tolerance | ±0.5mm |
| Weight | 10 ton |
